【object 】

◆Parts of various types of brake cylinder after decomposition - Railway Train

◆The brake cylinder

◆The brake cylinder front cover, back cover

◆The brake cylinder piston

◆The spring

【 cleaning principle】

The workpiece is placed on a turntable dirt cleaning machine and rotate with the rotary disc, high temperature and high pressure water generated by the heating system and pressurization system of degreasing cleaning agent, to 27M3 ~ 45M3/h circulation flow through the nozzle workpiece, dozens of multidimensional indoor upper and lower, left and right direction of four, four from the direction of high-speed jet the rotation of the workpiece, the workpiece surface peeling fast grease, dirt and other impurities, water solution after cleaning the flow to the bottom cleaning machine, and then filtered and preheating re entering the cleaning procedures, repeated use. After the cleaning, clean hot water produced by the heating system and pressurization system, atomization rinsing nozzle through the workpiece indoor multi directions, jet from multiple directions to the rotation of the workpiece, the rapid removal of the workpiece surface residual amount of cleaning agent and other impurities, carry out thorough clean cleaning of the workpiece. In the case of 8M412-SY, each set of tooling can clean 2 sets of brake cylinder, each cleaning takes 12min, working in two shifts a day, every day can be washed 160 sets of brake cylinder, 250 days a year according to the calculation, the annual 40000 sets of brake cylinder can be cleaned disintegration part.

 

The cleaning effect is good, can fully meet the requirements of user process to realize the comprehensive cost of the workpiece fast natural dry cleaning of parts of the lower The workpiece to facilitate loading and unloading .The workpiece loading turntable and gate design in the door together, together with the workpiece can always stay in any location, very convenient to use The whole workpiece loading and unloading spreader.